Test Report : results

run
computes_installed.bats
- num_computes is greater than zero
- koomie_cf command is available
- get uptime from compute nodes produces results
- correct number of compute hosts respond
- verify boot times are reasonable
sms_installed.bats
- Verify hostname matches expectations
- Base OS check
lmod
- [lmod] test that the setup function passed
spack
- [spack] check for RPM
- [spack] add compiler
- [spack] test build
- [spack] test module refresh
os_distribution
- [BOS] OS distribution matches (local)
computes
- [BOS] OS distribution matches (2 active computes) [s]
- [BOS] consistent kernel (2 active computes)
- [BOS] increased locked memory limits
- [BOS] syslog forwarding
EasyBuild
- [EasyBuild] check for RPM
- [EasyBuild] test executable
- [EasyBuild] test install of tmux
lmod_installed
- [modules] Check if lmod RPM installed
interactive_commands
- [modules] module purge
- [modules] module list
- [modules] module help
- [modules] module load/unload
- [modules] module whatis
- [modules] module swap
- [modules] path updated
- [modules] module depends-on
rm_execution
- [modules] env variable passes through ()
- [modules] loaded module passes through ()
- [modules] module commands available in RMS job ()
- [modules] module load propagates thru RMS ()
run
- [charliecloud] check for RPM
- [charliecloud] build image
- [charliecloud] build alpine image from Docker (using singularity)
- [charliecloud] exec image locally
- [charliecloud] exec image via slurm
run
- [singularity] check for RPM
- [singularity] pull down ubuntu docker image
- [singularity] exec image
- [singularity] exec image via slurm
completion
- [singularity] check for bash completion
ntp
- [ntp] check for chronyc binary
- [ntp] verify local time in sync on SMS
- [ntp] verify local time in sync on compute
mem_limits
- [memlock] check increased soft limit
- [memlock] check increased hard limit
pdsh
- [pdsh] check for RPM (slurm)
- [pdsh] run a shell command on c[1-2] (slurm)
- [pdsh] check for pdsh-mod-slurm RPM (slurm)
- [pdsh] run a shell command on -P normal (slurm)
ompi_info
- [openmpi] check for no output to stderr with ompi_info
magpie
- [magpie] check for RPM
- [magpie] Verify MAGPIE module is loaded and matches rpm version
- [magpie] Verify module MAGPIE_DIR is defined and exists
munge
- [munge] check for OS provdied RPM
- [munge] Generate a credential
- [munge] Decode credential locally
- [munge] Run benchmark
sacct
- [slurm] check for working sacct[s]
sinfo
- [slurm] Verify SLURM RPM version matches sinfo binary

[F] run :
[F] spack : [spack] check for RPM
[F] spack : [spack] add compiler
[F] spack : [spack] test build
[F] spack : [spack] test module refresh
[F] EasyBuild : [EasyBuild] check for RPM
[F] EasyBuild : [EasyBuild] test executable
[F] EasyBuild : [EasyBuild] test install of tmux
[F] interactive_commands : [modules] path updated
[F] run : [charliecloud] check for RPM
[F] run : [charliecloud] build image
[F] run : [charliecloud] build alpine image from Docker (using singularity)
[F] run : [charliecloud] exec image locally
[F] run : [charliecloud] exec image via slurm
[F] run : [singularity] check for RPM
[F] run : [singularity] pull down ubuntu docker image
[F] run : [singularity] exec image
[F] run : [singularity] exec image via slurm
[F] completion : [singularity] check for bash completion
[F] ompi_info : [openmpi] check for no output to stderr with ompi_info

Test Suite: run

Results

Duration	0.0 sec
Tests	1
Failures	1

Tests

run

Test case:
Outcome:	Failed
Duration:	0.0 sec
Failed

(from function `module' in file /opt/ohpc/admin/lmod/lmod/init/bash, line 121,
 from function `setup_file' in test file dev-tools/cmake/run, line 12)
  `module load "${GCC_DEFAULT}"' failed
Lmod has detected the following error: The following module(s) are unknown:
"gnu15"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "gnu15"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test Suite: computes_installed.bats

Results

Duration	1.828 sec
Tests	5
Failures	0

Tests

computes_installed.bats

Test case:	num_computes is greater than zero
Outcome:	Passed
Duration:	0.019 sec

Test case:	koomie_cf command is available
Outcome:	Passed
Duration:	0.021 sec

Test case:	get uptime from compute nodes produces results
Outcome:	Passed
Duration:	0.593 sec

Test case:	correct number of compute hosts respond
Outcome:	Passed
Duration:	0.59 sec

Test case:	verify boot times are reasonable
Outcome:	Passed
Duration:	0.605 sec

Test Suite: sms_installed.bats

Results

Duration	0.029 sec
Tests	2
Failures	0

Tests

sms_installed.bats

Test case:	Verify hostname matches expectations
Outcome:	Passed
Duration:	0.012 sec

Test case:	Base OS check
Outcome:	Passed
Duration:	0.017 sec

Test Suite: lmod

Results

Duration	0.258 sec
Tests	1
Failures	0

Tests

lmod

Test case:	[lmod] test that the setup function passed
Outcome:	Passed
Duration:	0.258 sec

Test Suite: spack

Results

Duration	2.524 sec
Tests	4
Failures	4

Tests

spack

Test case:	[spack] check for RPM
Outcome:	Failed
Duration:	0.653 sec
Failed

(from function `setup' in test file spack, line 16)
  `module load spack || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"spack"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "spack"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[spack] add compiler
Outcome:	Failed
Duration:	0.607 sec
Failed

(from function `setup' in test file spack, line 16)
  `module load spack || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"spack"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "spack"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[spack] test build
Outcome:	Failed
Duration:	0.63 sec
Failed

(from function `setup' in test file spack, line 16)
  `module load spack || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"spack"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "spack"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[spack] test module refresh
Outcome:	Failed
Duration:	0.634 sec
Failed

(from function `setup' in test file spack, line 16)
  `module load spack || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"spack"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "spack"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test Suite: os_distribution

Results

Duration	0.008 sec
Tests	1
Failures	0

Tests

os_distribution

Test case:	[BOS] OS distribution matches (local)
Outcome:	Passed
Duration:	0.008 sec

Test Suite: computes

Results

Duration	2.367 sec
Tests	4
Failures	0

Tests

computes

Test case:	[BOS] OS distribution matches (2 active computes)
Outcome:	Skipped
Duration:	0.0 sec
Skipped

disable BOS_RELEASE check

Test case:	[BOS] consistent kernel (2 active computes)
Outcome:	Passed
Duration:	0.596 sec

Test case:	[BOS] increased locked memory limits
Outcome:	Passed
Duration:	1.181 sec

Test case:	[BOS] syslog forwarding
Outcome:	Passed
Duration:	0.59 sec

Test Suite: EasyBuild

Results

Duration	1.184 sec
Tests	3
Failures	3

Tests

EasyBuild

Test case:	[EasyBuild] check for RPM
Outcome:	Failed
Duration:	0.408 sec
Failed

(from function `module' in file /opt/ohpc/admin/lmod/lmod/init/bash, line 121,
 from function `setup' in test file EasyBuild, line 12)
  `module load EasyBuild' failed
Lmod has detected the following error: The following module(s) are unknown:
"EasyBuild"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "EasyBuild"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[EasyBuild] test executable
Outcome:	Failed
Duration:	0.393 sec
Failed

(from function `module' in file /opt/ohpc/admin/lmod/lmod/init/bash, line 121,
 from function `setup' in test file EasyBuild, line 12)
  `module load EasyBuild' failed
Lmod has detected the following error: The following module(s) are unknown:
"EasyBuild"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "EasyBuild"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[EasyBuild] test install of tmux
Outcome:	Failed
Duration:	0.383 sec
Failed

(from function `module' in file /opt/ohpc/admin/lmod/lmod/init/bash, line 121,
 from function `setup' in test file EasyBuild, line 12)
  `module load EasyBuild' failed
Lmod has detected the following error: The following module(s) are unknown:
"EasyBuild"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "EasyBuild"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test Suite: lmod_installed

Results

Duration	0.036 sec
Tests	1
Failures	0

Tests

lmod_installed

Test case:	[modules] Check if lmod RPM installed
Outcome:	Passed
Duration:	0.036 sec

Test Suite: interactive_commands

Results

Duration	3.346 sec
Tests	8
Failures	1

Tests

interactive_commands

Test case:	[modules] module purge
Outcome:	Passed
Duration:	0.088 sec

Test case:	[modules] module list
Outcome:	Passed
Duration:	0.191 sec

Test case:	[modules] module help
Outcome:	Passed
Duration:	0.199 sec

Test case:	[modules] module load/unload
Outcome:	Passed
Duration:	0.994 sec

Test case:	[modules] module whatis
Outcome:	Passed
Duration:	0.202 sec

Test case:	[modules] module swap
Outcome:	Passed
Duration:	0.465 sec

Test case:	[modules] path updated
Outcome:	Failed
Duration:	0.719 sec
Failed

(from function `assert_equal' in file ../common/test_helper_functions.bash, line 38,
 in test file interactive_commands, line 138)
  `assert_equal "$orig_manpath" $MANPATH' failed
output expected: /opt/ohpc/admin/lmod/lmod/share/man:
output observed: /opt/ohpc/admin/lmod/lmod/share/man::

Test case:	[modules] module depends-on
Outcome:	Passed
Duration:	0.488 sec

Test Suite: rm_execution

Results

Duration	1.569 sec
Tests	4
Failures	0

Tests

rm_execution

Test case:	[modules] env variable passes through ()
Outcome:	Passed
Duration:	0.334 sec

Test case:	[modules] loaded module passes through ()
Outcome:	Passed
Duration:	0.466 sec

Test case:	[modules] module commands available in RMS job ()
Outcome:	Passed
Duration:	0.432 sec

Test case:	[modules] module load propagates thru RMS ()
Outcome:	Passed
Duration:	0.337 sec

Test Suite: run

Results

Duration	2.378 sec
Tests	5
Failures	5

Tests

run

Test case:	[charliecloud] check for RPM
Outcome:	Failed
Duration:	0.478 sec
Failed

(from function `setup' in test file run, line 23)
  `module load charliecloud || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"charliecloud"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "charliecloud"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[charliecloud] build image
Outcome:	Failed
Duration:	0.476 sec
Failed

(from function `setup' in test file run, line 23)
  `module load charliecloud || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"charliecloud"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "charliecloud"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[charliecloud] build alpine image from Docker (using singularity)
Outcome:	Failed
Duration:	0.474 sec
Failed

(from function `setup' in test file run, line 23)
  `module load charliecloud || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"charliecloud"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "charliecloud"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[charliecloud] exec image locally
Outcome:	Failed
Duration:	0.471 sec
Failed

(from function `setup' in test file run, line 23)
  `module load charliecloud || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"charliecloud"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "charliecloud"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test case:	[charliecloud] exec image via slurm
Outcome:	Failed
Duration:	0.479 sec
Failed

(from function `setup' in test file run, line 23)
  `module load charliecloud || exit 1' failed
Lmod has detected the following error: The following module(s) are unknown:
"charliecloud"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "charliecloud"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test Suite: run

Results

Duration	0.092 sec
Tests	4
Failures	4

Tests

run

Test case:	[singularity] check for RPM
Outcome:	Failed
Duration:	0.057 sec
Failed

(from function `assert_success' in file ./common/test_helper_functions.bash, line 58,
 in test file run, line 27)
  `assert_success    ' failed

-- command failed --
status : 1
output : which: no singularity in (/usr/libexec/bats-core:/home/ohpc-test/.local/bin:/home/ohpc-test/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin)
--

Test case:	[singularity] pull down ubuntu docker image
Outcome:	Failed
Duration:	0.011 sec
Failed

(in test file run, line 33)
  `singularity pull ${IMAGE} docker://${DISTRO}:latest' failed with status 127
/home/ohpc-test/tests/runtimes/singularity/run: line 33: singularity: command not found

Test case:	[singularity] exec image
Outcome:	Failed
Duration:	0.011 sec
Failed

(in test file run, line 40)
  `singularity exec ${IMAGE} cat /etc/os-release | grep "^ID=${DISTRO}" ' failed
/home/ohpc-test/tests/runtimes/singularity/run: line 40: singularity: command not found

Test case:	[singularity] exec image via slurm
Outcome:	Failed
Duration:	0.013 sec
Failed

(from function `ERROR_RETURN' in file ./common/functions, line 17,
 from function `check_exe' in file ./common/functions, line 40,
 from function `run_serial_binary' in file ./common/functions, line 229,
 in test file run, line 45)
  `run_serial_binary singularity exec ${IMAGE} cat /etc/os-release' failed
[OHPC-TEST:ERROR]: singularity is not available for execution

Test Suite: completion

Results

Duration	0.071 sec
Tests	1
Failures	1

Tests

completion

Test case:	[singularity] check for bash completion
Outcome:	Failed
Duration:	0.071 sec
Failed

(from function `assert_equal' in file ./common/test_helper_functions.bash, line 38,
 from function `assert_output' in file ./common/test_helper_functions.bash, line 49,
 in test file completion, line 65)
  `assert_output "build"' failed
output expected: build
output observed:

Test Suite: ntp

Results

Duration	0.332 sec
Tests	3
Failures	0

Tests

ntp

Test case:	[ntp] check for chronyc binary
Outcome:	Passed
Duration:	0.016 sec

Test case:	[ntp] verify local time in sync on SMS
Outcome:	Passed
Duration:	0.152 sec

Test case:	[ntp] verify local time in sync on compute
Outcome:	Passed
Duration:	0.164 sec

Test Suite: mem_limits

Results

Duration	0.308 sec
Tests	2
Failures	0

Tests

mem_limits

Test case:	[memlock] check increased soft limit
Outcome:	Passed
Duration:	0.149 sec

Test case:	[memlock] check increased hard limit
Outcome:	Passed
Duration:	0.159 sec

Test Suite: pdsh

Results

Duration	2.431 sec
Tests	4
Failures	0

Tests

pdsh

Test case:	[pdsh] check for RPM (slurm)
Outcome:	Passed
Duration:	0.045 sec

Test case:	[pdsh] run a shell command on c[1-2] (slurm)
Outcome:	Passed
Duration:	1.577 sec

Test case:	[pdsh] check for pdsh-mod-slurm RPM (slurm)
Outcome:	Passed
Duration:	0.043 sec

Test case:	[pdsh] run a shell command on -P normal (slurm)
Outcome:	Passed
Duration:	0.766 sec

Test Suite: ompi_info

Results

Duration	0.487 sec
Tests	1
Failures	1

Tests

ompi_info

Test case:	[openmpi] check for no output to stderr with ompi_info
Outcome:	Failed
Duration:	0.487 sec
Failed

(from function `module' in file /opt/ohpc/admin/lmod/lmod/init/bash, line 121,
 in test file ompi_info, line 27)
  `module load "${COMPILER_FAMILIES%% *}"' failed
Lmod has detected the following error: The following module(s) are unknown:
"gnu15"

Please check the spelling or version number. Also try "module spider ..."
It is also possible your cache file is out-of-date; it may help to try:
  $ module --ignore_cache load "gnu15"

Also make sure that all modulefiles written in TCL start with the string
#%Module

Test Suite: magpie

Results

Duration	0.856 sec
Tests	3
Failures	0

Tests

magpie

Test case:	[magpie] check for RPM
Outcome:	Passed
Duration:	0.056 sec

Test case:	[magpie] Verify MAGPIE module is loaded and matches rpm version
Outcome:	Passed
Duration:	0.475 sec

Test case:	[magpie] Verify module MAGPIE_DIR is defined and exists
Outcome:	Passed
Duration:	0.325 sec

Test Suite: munge

Results

Duration	1.097 sec
Tests	4
Failures	0

Tests

munge

Test case:	[munge] check for OS provdied RPM
Outcome:	Passed
Duration:	0.042 sec

Test case:	[munge] Generate a credential
Outcome:	Passed
Duration:	0.017 sec

Test case:	[munge] Decode credential locally
Outcome:	Passed
Duration:	0.016 sec

Test case:	[munge] Run benchmark
Outcome:	Passed
Duration:	1.022 sec

Test Suite: sacct

Results

Duration	0.0 sec
Tests	1
Failures	0

Tests

sacct

Test case:	[slurm] check for working sacct
Outcome:	Skipped
Duration:	0.0 sec
Skipped

Temporarily skip sacct check

Test Suite: sinfo

Results

Duration	0.08 sec
Tests	1
Failures	0

Tests

sinfo

Test case:	[slurm] Verify SLURM RPM version matches sinfo binary
Outcome:	Passed
Duration:	0.08 sec